Difference between revisions of "Singing Pixel Snowman"
(Created page with "Building on the method I used for the StarFlake Spinner, I am adding two 7' Singing Snowmen to my Display. Bill of Materials Polyethylene Coil 3/4" 100 PSI pipe - (approx 20...") |
|||
| Line 4: | Line 4: | ||
Polyethylene Coil 3/4" 100 PSI pipe - (approx 20 Feet) | Polyethylene Coil 3/4" 100 PSI pipe - (approx 20 Feet) | ||
| − | 3/4-in Dia Coupling Plastic Coil Fitting (3) | + | /3/4-in Dia Coupling Plastic Coil Fitting (3) |
| − | 2" Sched 40 PVC Pipe - (10 Feet) | + | /2" Sched 40 PVC Pipe - (10 Feet) |
| − | 2-in x 1-1/2-in dia PVC Schedule 40 Double Sanitary Tee Fitting - (1) | + | /2-in x 1-1/2-in dia PVC Schedule 40 Double Sanitary Tee Fitting - (1) |
| − | 2" dia PVC Cap Fitting - (1) | + | /2" dia PVC Cap Fitting - (1) |
| − | 2" to 3/4" PVC adapter - (2) | + | /2" to 3/4" PVC adapter - (2) |
| − | ProConnex 3/4-in EMT Connectors - (2) | + | /ProConnex 3/4-in EMT Connectors - (2) |
| − | Metallic 3/4" Emt 10-ft Conduit - (10 feet) | + | /Metallic 3/4" Emt 10-ft Conduit - (10 feet) |
| − | Boscoyo Pixel Strips - (approximately 6) | + | /Boscoyo Pixel Strips - (approximately 6) |
| − | Boscoyo ChromaTrim - ( | + | /Boscoyo ChromaTrim - (2) |
| − | Zip Ties 4" - hundreds | + | /Zip Ties 4" - hundreds |
| − | 8" - a lot | + | /8" - a lot |
| − | 11" - more than you might think | + | /11" - more than you might think |
| − | Boscoyo Custom Cut Snowman Face - (1) | + | /Boscoyo Custom Cut Snowman Face - (1) |
| − | Boscoyo ChromaHatMatrix Small - (1) | + | /Boscoyo ChromaHatMatrix Small - (1) |
I started my design by creating a Custom Coro face and hat, I worked with Boscoyo Studios to have these produced, as well as, building two spinners using 3/4" ADS plastic water pipe 100 PSI, and Boscoyo Pixel Strips. Laid out the head to be 18" (also surrounded by ADS pipe), spinner 1 (middle section of the body) to be 24", and Spinner 2 (lower body) to be 30" | I started my design by creating a Custom Coro face and hat, I worked with Boscoyo Studios to have these produced, as well as, building two spinners using 3/4" ADS plastic water pipe 100 PSI, and Boscoyo Pixel Strips. Laid out the head to be 18" (also surrounded by ADS pipe), spinner 1 (middle section of the body) to be 24", and Spinner 2 (lower body) to be 30" | ||
Revision as of 08:44, 20 August 2018
Building on the method I used for the StarFlake Spinner, I am adding two 7' Singing Snowmen to my Display.
Bill of Materials
Polyethylene Coil 3/4" 100 PSI pipe - (approx 20 Feet) /3/4-in Dia Coupling Plastic Coil Fitting (3) /2" Sched 40 PVC Pipe - (10 Feet) /2-in x 1-1/2-in dia PVC Schedule 40 Double Sanitary Tee Fitting - (1) /2" dia PVC Cap Fitting - (1) /2" to 3/4" PVC adapter - (2) /ProConnex 3/4-in EMT Connectors - (2) /Metallic 3/4" Emt 10-ft Conduit - (10 feet) /Boscoyo Pixel Strips - (approximately 6) /Boscoyo ChromaTrim - (2) /Zip Ties 4" - hundreds
/8" - a lot
/11" - more than you might think
/Boscoyo Custom Cut Snowman Face - (1) /Boscoyo ChromaHatMatrix Small - (1)
I started my design by creating a Custom Coro face and hat, I worked with Boscoyo Studios to have these produced, as well as, building two spinners using 3/4" ADS plastic water pipe 100 PSI, and Boscoyo Pixel Strips. Laid out the head to be 18" (also surrounded by ADS pipe), spinner 1 (middle section of the body) to be 24", and Spinner 2 (lower body) to be 30"