Shelby's ESP Firmware
Revision as of 16:53, 13 January 2019 by Jllracer55 (talk | contribs)
First step in programming an ESP Module is to obtain a programmer. There are both programmers that already exist and can be purchased on sites like ebay or aliexpress and there are a few that have been developed by the DIY community. The programmer of choice for this article is the ESP Flashamater which was developed by dirknerkle.
Besides the programmer you will also need a USB to TTL adapter. The adapter in this article will be the CP2102 adapter. This adapter again can be easily purchased on ebay.