Difference between revisions of "Other DIY Testers"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
== Simple circuit continuity tester == | == Simple circuit continuity tester == | ||
| − | You can build a simple circuit continuity tester with just a few parts. This would allow testing a cut or broken extension cord to discover which wire connects to the wide terminal at the plug end. (Of course, disconnect the extension cord from the wall socket first!). You could also use it to test the ends of a communication cable to discover which wire connects to which pin. If there's "continuity" (i.e. "a connection") then the LED would light. If not, the LED would remain dark. | + | You can build a simple circuit continuity tester with just a few parts. This would allow testing a cut or broken extension cord to discover which wire connects to the wide terminal (common) and which wire is the narrow terminal (hot) at the plug end. (Of course, disconnect the extension cord from the wall socket first!). You could also use it to test the ends of a communication cable to discover which wire connects to which pin. If there's "continuity" (i.e. "a connection") then the LED would light. If not, the LED would remain dark. |
[[file:Simple_continuity_tester.jpg]] | [[file:Simple_continuity_tester.jpg]] | ||
Revision as of 09:44, 16 March 2015
Simple circuit continuity tester
You can build a simple circuit continuity tester with just a few parts. This would allow testing a cut or broken extension cord to discover which wire connects to the wide terminal (common) and which wire is the narrow terminal (hot) at the plug end. (Of course, disconnect the extension cord from the wall socket first!). You could also use it to test the ends of a communication cable to discover which wire connects to which pin. If there's "continuity" (i.e. "a connection") then the LED would light. If not, the LED would remain dark.
