24ch DMX 8 RGB flood controller

From diychristmas.org wiki
Revision as of 11:24, 11 November 2015 by RobG (talk | contribs) (Created page with " === DIP switch === 1 - DMX through (pass DMX data as is, do not remove any channels) 2 - Use exponential lookup table to map channel value to PWM value (otherwise, mapping is...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

DIP switch

1 - DMX through (pass DMX data as is, do not remove any channels) 2 - Use exponential lookup table to map channel value to PWM value (otherwise, mapping is linear) 3 - Invert output (when inverted in software, 0 will result in 0.05% PWM, so small glow might be visible)

S1 switch

Power On - normal operation, listen on DMX input Press - test mode 1, rainbow Press - test mode 2, cycle RGB (0, R, G, B, RG, RB, GB, RGB, 0, ...) Press - default

LED

DMX activity


24ch-DMX-8-RGB-1.jpg


Solder resistors

24ch-DMX-8-RGB-2.jpg

Solder capacitors

24ch-DMX-8-RGB-3.jpg

Solder remaining components and insert ICs

24ch-DMX-8-RGB-4.jpg

Retrieved from "https://www.diychristmas.org/wiki/index.php?title=24ch_DMX_8_RGB_flood_controller&oldid=1249"