ErnieHorning: Refined the introductory wording for clarity, simplified the description of the frame assembly, clarified the discussion of occasional GFCI trips in wet conditions, and noted that tomato cage frames remain a popular foundation for both traditional light strings and modern pixel displays.

2026-07-21T15:06:05Z

Refined the introductory wording for clarity, simplified the description of the frame assembly, clarified the discussion of occasional GFCI trips in wet conditions, and noted that tomato cage frames remain a popular foundation for both traditional light strings and modern pixel displays.

Admin: Created page with "===Tomato cages=== A three-wire, four hoop tomato cage A “tomato cage” is an inexpensive frame made with galvanized steel wire, usuall..."

2015-05-08T19:44:40Z

Created page with "===Tomato cages=== right|100px|A three-wire, four hoop tomato cage A “tomato cage” is an inexpensive frame made with galvanized steel wire, usuall..."

New page

===Tomato cages===
[[File:Tomato-cage.jpg|right|100px|A three-wire, four hoop tomato cage]]
A “tomato cage” is an inexpensive frame made with galvanized steel wire, usually with three long wires soldered to three hoops of proportionally increasing sizes. In traditional use, the long wires are inserted into the ground around a tomato plant and allow the plant to grow up the wires, with the hoops supporting the vines. Standard round tomato cages have hoops that are 12-, 14 or 18-inches in diameter. Cage heights range from 33-inches to 54-inches. Cages can be found in most home improvement stores, local hardware stores or garden centers.

A tomato-cage Christmas tree takes two tomato cages and inserts them inside one another, offsetting the leg wires so the six wires are evenly spaced. This apparatus is then turned upside down and the two cages are held together with duct tape or zip ties (or both). The six wires are gathered at the top to make a peak.

Christmas lights can then be strung onto this armature.

Many Christmas-lights enthusiasts find that lights strung onto these metal frames can during rain and/or snow trip a [[Terminology/Definitions#G|GFCI]], despite their being no real electrical problem. Two solutions have been used to overcome this problem: wrapping the entire metal frame in plastic film wrap (available at office-supply stores) before stringing lights or setting the tree on a Styrofoam pad.

@@ Line 1: / Line 1: @@
 ===Tomato cages===
 [[File:Tomato-cage.jpg|right|100px|A three-wire, four hoop tomato cage]]
-A “tomato cage” is an inexpensive frame made with galvanized steel wire, usually with three long wires soldered to three hoops of proportionally increasing sizes. In traditional use, the long wires are inserted into the ground around a tomato plant and allow the plant to grow up the wires, with the hoops supporting the vines. Standard round tomato cages have hoops that are 12-, 14 or 18-inches in diameter. Cage heights range from 33-inches to 54-inches. Cages can be found in most home improvement stores, local hardware stores or garden centers.
+A tomato cage is an inexpensive galvanized steel wire frame originally designed to support tomato plants in the garden, usually with three long wires soldered to three hoops of proportionally increasing sizes. The legs are pushed into the ground around a tomato plant, while the circular hoops support the growing vines. Standard round tomato cages have hoops that are 12-, 14 or 18-inches in diameter. Cage heights range from 33-inches to 54-inches. Cages can be found in most home improvement stores, local hardware stores or garden centers.
-A tomato-cage Christmas tree takes two tomato cages and inserts them inside one another, offsetting the leg wires so the six wires are evenly spaced. This apparatus is then turned upside down and the two cages are held together with duct tape or zip ties (or both). The six wires are gathered at the top to make a peak.
+A tomato-cage Christmas tree takes two tomato cages and inserts them inside one another, offsetting the leg wires so the six wires are evenly spaced. This frame is then turned upside down and the two cages are held together with duct tape or zip ties (or both). The six wires are gathered at the top to make a peak.
 Christmas lights can then be strung onto this armature.
-Many Christmas-lights enthusiasts find that lights strung onto these metal frames can during rain and/or snow trip a [[Terminology/Definitions#G|GFCI]], despite their being no real electrical problem. Two solutions have been used to overcome this problem: wrapping the entire metal frame in plastic film wrap (available at office-supply stores) before stringing lights or setting the tree on a Styrofoam pad.
+Some DIY'ers have found that, during rain or wet snow, lights attached directly to the metal frame may occasionally trip a [[Terminology/Definitions#G|GFCI]] even when no actual wiring fault exists. I Two solutions have been used to overcome this problem: wrapping the entire metal frame in plastic film wrap (available at office-supply stores) before stringing lights or setting the tree on a Styrofoam pad.

Tomato Cage Design - Revision history

Admin: Created page with "===Tomato cages=== A three-wire, four hoop tomato cage A “tomato cage” is an inexpensive frame made with galvanized steel wire, usuall..."